| |
Numerical
Control, Automatical
Precision, High
Speed Saw |
|
HMC-600NFA-NC+MU4
Precision, Clean, Fast.
| |
| |
Features:
High Power Output: High Speed cutting and designed for mass production.
Material feed by servo motor & ball screw system. This will
ensure the cutting length tolerance in ± 0.1mm.
After cut-off, before the saw blade returned, the working piece
was moved forward and the material was moved backward. This will
make sure there are no any knife scratches on the working piece.
Use the touch screen as the main control panel. It's easy to
learn and easy to operate.
Designed in high power output performance, and very fast
cutting; it is suited for mass production
|
|
Features:
High precision cutting: Rigid structure to reduce vibration.
Servo controlled material feeding: To ensure the cutting length tolerance to be within +/- 0.005" (+/- 0.1mm)
Touch screen operation with friendly instructions.
High power output: High speed cutting and designed for mass production.
(Option) MU4 loading magazine, a fully automatic production line, saving man power and increasing the production rate.
|
|
| |
HHS-610NFA-NC |
Cutting Capacity (Aluminum) |
 410mm W x 150mm H |
 0 190 ~ 2 pieces |
190mm H x 140mm W |
Motor |
Spindle Motor AC 15HP |
Material feed, AC 1000W Servo Motor |
Hydraulic pump: 30 L.X. Twin Heads |
Cutting Length |
20mm ~ 2000mm |
Last End Crop |
Min. 100 ~ (100+)mm |
Saw Blade |
T.C.T. Blade 0 450 ~ 0 610mm |
Cooling System |
Oil-Mist System |
Electrical Control |
Numerical control with touch screen |
Pressured Air |
3-5Kg/cm sq.; 120 NL/min |
Dimension |
2300 W x 2400 D x 2000 H (mm) |
Gross Weight |
3000KGS |
Optional Accessories |
1. Chips Vacuum Collector
2. Power invertor for arbor
speed changing. |
|
|
| HMC-600NFA-NC+MU4 |
Cutting Capacity |
|
Ø120 mm |
O |
Ø204 mm |
|
175 x 175 mm |
|
175 x 200 mm |
|
Multiple Ø60mm x 4 |
Material Feed |
By Electrical Servo, One Stroke 500 mm |
Cutting Speed |
Infinitely Adjustable |
Main Motor |
AC 15HP/4P |
Saw Blade |
TCT Blade Ø400 mm - Ø610 mm, Bore Ø25.4 |
Arbor RPM |
Standard 1740 RPM / 2780 RPM, With Inverter 1500-4800 RPM |
Cooling System |
Air-Oil Mist System |
Hydraulic System |
AC 3HP/4P 20L/20L Twin Pump (With Pressure30-50 kg/cm² |
Dimension |
200 x 185 x 185 (cm) |
Weight |
1500kgs |
Optional Accessories |
1. Chips Vacuum Collector |
2. Power Inverter for Arbor Speed Change |
3. Working Piece Discharge Convery Unit WDC 05 |
|
|
